Convection Steamer, Electric, (3) pan cap. top & (4) pan cap. bottom, manual controls each with three way power switch (ON/OFF/Delime), stainless steel interior and exterior finish, stacked units on stainless steel storage cabinet base, split water connections, NSF 7.5kw & 10kw
The steamer shall be constructed of a satin finish stainless steel #304. The cooking chamber is a one piece all welded, #316 stainless steel with coved corners. The heavy duty door shall have an inner liner of stainless steel with a full perimeter gasket seal, an outer liner of one piece all welded stainless steel, and a positive lock and seal mechanism with spring release. Each compartment shall be provided with removable stainless steel pan supports. A stainless steel drip trough shall be integrally connected to drain to collect condensate when the doors are opened.
The control housing shall be constructed of stainless steel with a full access removable panel. Each compartment shall have individual controls which include an illuminated three way power switch (ON/OFF/Delime), a pilot ready light, a pilot cooking light, a 60-minute electric timer which sounds an audible signal at the end of the cooking cycle, and solid state generator controls for each generator. Steam flow to the cooking chamber shall be cut off when the door is opened and reactivated when the door is closed.